Using a Mouse with GEdit: While in menus, use the mouse to move the menu bar just as you would with the cursor control keys. The bar will move in the direction the mouse is moved. The left button performs as the <Enter> key and the middle button (if you have one) performs as the as the <Esc> key. While in data entry screens (i.e. the Edit Setup Screen) use the mouse to move the cursor just as you would with the cursor control keys. The left button performs as the <Enter> key, and the middle button (if you have one) performs as the <Esc> key. While editing, a mouse cursor is displayed on the screen along with the key cursor. The key cursor blinks and the mouse cursor remains solid. The mouse cursor can be moved to any position on the screen by moving the mouse. To move the key cursor to the mouse cursor press the the right button. Moving the mouse cursor to the any edge of the edit screen and pressing the right button scrolls the screen as if you were holding down a cursor control key. Press Esc to exit/any other key to continue... Using a Mouse with GEdit (cont): The Mouse Menu is displayed at the top of the edit screen. This menu lists the commands executed by function keys 1 though 10 along with the respective function key number. Also displayed on the menu are arrows which represent Screen-Shift Left, Screen-Shift Right, Page Up, and Page Down. The ? at the end of the menu represents Help. To exe- cute any of these commands, place the mouse cursor on the command and press the left button. Press PgUp or for previous page/any other key to continue...